Télécommande Voltcraft FB-01 SWD compatible avec les modèles d'onduleurs — FB-01 SWD

The Voltcraft FB-01 SWD remote control is a wired or wireless accessory designed for use with compatible inverter models. It enables remote operation of essential inverter functions and adjustments to settings from a convenient location, reducing the need to access the inverter directly. The unit is intended for installation in systems where remote switching, monitoring, or parameter changes improve workflow and maintenance efficiency.

Advantages

The remote control provides simplified access to inverter controls, allowing users to switch modes and change parameters without physical interaction with the inverter chassis. Its wired and wireless operation options offer installation flexibility for different system layouts. The control unit is compact and designed to integrate with compatible inverters while maintaining clear feedback on selected functions.

Suitable for

• Remote switching of inverter operating modes
• Adjusting inverter parameters from a control panel or desk
• Installation in off-grid and backup power systems where access to the inverter is limited
• Situations requiring centralized control of multiple inverters (where supported)

Key specifications

• Control type: wired and wireless remote control compatible with supported inverter models
• Functions: basic remote switching and parameter adjustment of inverter settings
• Form factor: compact control unit intended for panel or surface mounting
• Installation: designed for integration with compatible inverters using dedicated interface connections
• Feedback: visual indicators for function confirmation (LED or display depending on inverter compatibility)

How to use

Connect the remote control to the compatible inverter following the manufacturer’s installation instructions for wired or wireless setup. Once installed, use the control buttons to select operating modes, enable or disable outputs, and adjust available parameters. Verify that the inverter recognises the remote control by observing the visual feedback on the unit and the inverter interface. For wireless operation, ensure correct pairing and sufficient signal strength in the installation location.

Recommendations

Install the remote control in a dry, accessible location and route cables to avoid mechanical strain. Follow the inverter manufacturer’s manual for pairing, wiring diagrams, and any firmware or compatibility notes. Test remote functions after installation and periodically verify connections and signal quality to maintain reliable operation.