Metabo UHEV 2860-2 Quick perforateur – 1100 W, 3,4 J (600713500)

The Metabo UHEV 2860-2 Quick is a rotary hammer designed for heavy-duty drilling and chiselling tasks. Powered by an 1100 W motor and capable of reaching up to 2100 revolutions per minute, this perforator offers the torque and speed required for professional masonry, concrete and construction work. It uses an SDS Plus chuck for fast, tool-free bit changes and achieves a maximum concrete drilling diameter of 28 mm. A 4 m power cord provides freedom of movement on jobsites while the compact housing in green and black supports comfortable handling during extended use.

Advantages

The tool combines a high-power electric motor with robust impact mechanics to deliver consistent performance in demanding conditions. The SDS Plus system simplifies bit replacement and improves jobsite efficiency. A relatively high no-load speed allows for faster drilling rates in many materials, and the long power cable reduces the need for extension leads. The ergonomic casing and balanced design help lower operator fatigue during continuous operation.

Suitable for

• Drilling holes in concrete, brick and masonry up to 28 mm diameter
• Light demolition and chiselling work in construction and renovation
• Installing anchors, dowels and electrical boxes in walls
• Professional tradespeople and advanced DIY tasks requiring durable rotary hammers

Key specifications

• Motor power: 1100 W
• Maximum speed: 2100 RPM (no-load)
• Maximum concrete drilling diameter: 28 mm
• Chuck type: SDS Plus
• Power cable length: 4 m
• Housing colours: green and black

How to use

Before use, inspect the power cable and housing for damage and select the appropriate SDS Plus drill bit or chisel for the material and task. Insert the bit into the chuck until it locks, set the machine to the required mode (drilling or hammer drilling) and start at a low speed to mark the drilling point. Apply steady, even pressure without forcing the tool; let the hammering action perform the work. For larger holes or deeper drilling, periodically withdraw the bit to clear dust and improve cutting efficiency. After finishing, switch off the tool and disconnect from the mains before removing the bit or performing any maintenance.

Recommendations

For safe and optimal results, use appropriate personal protective equipment (eye protection, hearing protection, and dust mask) and select drill bits and chisels rated for concrete and masonry. Allow the motor to cool during prolonged heavy use, and use a vacuum or dust extraction where possible to reduce airborne dust when drilling into concrete or masonry.