Câble de signal Microconnect AUDSPEAKER4 25 m blanc

The Microconnect AUDSPEAKER4 is a 25 m speaker signal cable in white, designed for reliable audio transmission between amplifiers and speakers or other audio devices. It uses a 2 x 1.5 mm² CCA conductor construction with conductor strands 2x30/0.25 mm and an outer dimension of 3.1 x 6.5 mm, offering a balance of flexibility and mechanical durability while remaining lightweight (0.526 kg).

Advantages

White finish for a discreet installation; copper-clad aluminum (CCA) conductors provide cost-effective conductivity with reduced weight compared to pure copper; 25 m length covers typical room-to-speaker distances without additional joins; compact outer dimensions allow easy routing through cable channels and behind furniture.

Suitable for

• Connecting passive speakers to amplifiers or receivers
• Home audio setups in living rooms, bedrooms or small studios
• Temporary or permanent installations where a 25 m cable run is needed

Key specifications

• Cable length: 25 m
• Conductor: 2 x 1.5 mm² CCA (2x30/0.25 mm)
• Outer dimension: 3.1 x 6.5 mm
• Weight: 0.526 kg
• Colour: White

How to use

Strip the cable ends to expose the conductors, taking care not to nick the strands. Connect the positive and negative conductors to the corresponding speaker and amplifier terminals, ensuring secure screw or spring-clip connections. Route the cable to avoid tight bends and mechanical stress; if a permanent installation is required, fix the cable with appropriate clips or conduits. For best signal quality, avoid running the speaker cable in parallel with mains power cables for long distances.

Recommendations

For typical home audio use, the AUDSPEAKER4 is suitable for runs up to 25 m. If longer distances or maximum fidelity are required, consider using a larger cross-section pure copper cable to reduce attenuation. Inspect cable ends for oxidation or damage before connecting and keep connections clean and tight.