Câble de signal Microconnect AUDSPEAKER3 10 m blanc

The Microconnect AUDSPEAKER3 is a 10 m white signal cable for connecting speakers and transmitting audio signals. It features a 2 x 1.5 mm² CCA conductor (2x30/0.25 mm) and an outer cable size of 3.1 x 6.5 mm, providing a compact and lightweight solution (0.166 kg) for home or professional audio setups.

Advantages

The cable offers reliable audio transmission with a CCA (copper-clad aluminum) conductor that balances conductivity and cost. Its 10 m length and lightweight design make it easy to route and install. The white outer jacket provides a discreet appearance for visible installations and the specified conductor geometry (2x30/0.25 mm) ensures consistent signal path for speaker connections.

Suitable for

• Connecting passive loudspeakers to amplifiers or receivers
• Home audio systems and multi-room speaker setups
• Short-stage or presentation audio wiring where 10 m length is sufficient

Key specifications

• Cable length: 10 m
• Conductor: 2 x 1.5 mm² CCA (2x30/0.25 mm)
• Outer dimensions: 3.1 x 6.5 mm
• Colour: White
• Weight: 0.166 kg
• Brand: MicroConnect, MPN: AUDSPEAKER3, EAN: 5712505338421

How to use

Strip the cable ends to expose the conductors according to your speaker and amplifier terminal requirements, taking care not to nick the conductors. Connect the positive and negative conductors to the corresponding terminals on the speaker and amplifier or receiver. Route the cable to avoid tight bends and sources of electromagnetic interference. Verify connections and test audio at low volume before normal operation.

Recommendations

For best performance, keep run lengths within the intended 10 m length without excessive splices, avoid running the cable parallel to mains power lines, and use proper terminal connections to minimize contact resistance. CCA conductors have slightly higher resistance than pure copper—use within typical speaker distances for optimal results.