Régulateur de puissance KEMO FG002N 230 V/AC

With the Kemo FG002N, ohmic or inductive 230 V/AC loads that can be controlled with a phase-angle control can be continuously adjusted in power.

• Up to 400 W load
• Up to 800 W load with additional interference filter
• Briefly (max. 3 sec) up to 1600 W possible

Up to 400 W load, the controller has CE approval. It can also control loads up to 800 W, but then an additional interference filter must be connected upstream. Briefly (max. 3 seconds), loads up to 1600 W can also be controlled (e.g., for high starting currents of electric motors, only with an additional upstream interference filter).

Ohmic loads are e.g. electric heaters, soldering irons, etc. Devices that already have built-in control electronics cannot be connected.

• For indoor use only!

Devices that cannot be controlled with a phase-angle control must not be connected. These include e.g. motors with starting capacitor and synchronous motors. The built-in interference filter is designed for loads up to max. 400 W. If larger loads are to be connected (max. 800 W continuous operation, max. 1600 W for max. 3 seconds), then an interference filter adapted to the load must be connected before the power controller. This filter is not included.

• 1x Kemo FG002N 230V power controller