Gaine de câble DeLOCK 19181 noire

The DeLOCK 19181 Cable Sleeve in black is a woven polyester sleeve designed to bundle and protect exposed cables, electrical tubes and wires. Made from special continuous fibres combining monofilament and multifilament construction, the sleeve provides increased flame resistance and abrasion protection. It is supplied as a self-closing, cuttable sleeve with a diameter of 2.5 cm and a length of 2000 mm, suitable for a wide temperature range from -50 to 150 °C.

Advantages

The woven construction offers improved flame resistance and abrasion resistance while keeping the sleeve flexible and lightweight. The self-closing design allows cables to be added or removed multiple times without tools. The sleeve can be shortened to the required length using a hot cutting tool to prevent fraying. Its black polyester material is heat-tolerant within the specified temperature range and provides a neat, discreet appearance for cable management.

Suitable for

• Bundling power and data cables in home or office installations
• Protecting wiring in AV setups and server racks
• Organising cables for automotive or industrial equipment within the stated temperature range
• Exposed cable runs where abrasion and flame resistance are required

Key specifications

• Brand: DELOCK
• Model / MPN: 19181
• Colour: Black
• Material: Polyester (woven monofilament/multifilament fibres)
• Diameter: 2.5 cm
• Length: 2000 mm
• Operating temperature: -50 to 150 °C
• EAN: 4043619191819

How to use

Push the cables into the open end of the self-closing woven sleeve; the braid expands to accept the bundle and closes around the cables when released. Add or remove cables as needed by spreading the braid and inserting or withdrawing the wires. If a shorter length is required, cut the sleeve to size with a hot cutting tool to seal the cut edge and reduce fraying. Ensure the sleeve fully covers exposed sections to provide protection.

Recommendations

Do not expose the sleeve to temperatures beyond the specified -50 to 150 °C range. Use a proper hot cutting tool to shorten the sleeve and avoid loose fibres; secure termination points if necessary with heat-shrink tubing or cable ties for strain relief.