Carte d'interface Inter-Tech KT008A

The Inter-Tech KT008A is an internal mSATA interface card designed to provide a SATA host connection with a maximum data transfer rate of 6 Gbit/s. The card is intended for installation inside desktop or compatible systems to enable the use of mSATA storage devices via a standard SATA interface. Its compact dimensions of 120 mm (width) × 120 mm (depth) × 20 mm (height) and a green-and-silver finish allow it to integrate unobtrusively into many system layouts while preserving drive bay space.

Advantages

The card offers a straightforward internal mSATA-to-SATA interface with support for high-speed transfers up to 6 Gbit/s, enabling compatibility with modern SATA storage devices. Its compact form factor and low weight make installation and handling simple. Compatibility with a range of Windows and Mac operating systems increases its versatility for different user environments. The green and silver design provides a neutral visual appearance for systems where component aesthetics are considered.

Suitable for

• Adding mSATA storage to desktops or systems with a free SATA host connection
• Upgrading older systems to use modern SATA-based mSATA SSDs
• System builders and technicians who need a compact internal interface card

Key specifications

• Interface type: internal mSATA to SATA host
• Maximum data transfer rate: 6 Gbit/s
• Dimensions: 120 mm × 120 mm × 20 mm
• Weight: 0.05 kg
• Product colour: green and silver
• Operating system compatibility: various Windows and Mac systems

How to use

Install the Inter-Tech KT008A into an available internal slot or mounting location in your desktop or compatible system where the card can connect to a SATA host interface. Secure the card according to your system’s internal mounting procedures and connect the appropriate SATA data and power cables to the host connectors. After physical installation, power on the system and verify that the connected mSATA device is detected by the operating system. Install or update drivers if required by your specific Windows or Mac version.

Recommendations

Handle the card on an anti-static surface and ensure the system is powered off and unplugged during installation. Verify compatibility of the target mSATA drive and the host SATA port before installation. If the operating system does not automatically recognize the device, consult the system BIOS/UEFI settings and install any necessary drivers provided by the operating system or hardware vendor.