Carte d'interface DeLOCK 64040

The DeLOCK 64040 is an internal interface card that adds one SFF-8612/M.2 connection to a system via a PCIe host interface. The card follows the PCIe 3.0 standard and supports NVMe protocol for SSDs, offering a maximum data transfer rate of 32 Gbit/s. It is compatible with Windows 10, 8.1 and 7 and is intended for installation inside a PC chassis.

Advantages

This interface card enables PCI Express transfer with NVMe support, allowing direct connection of an M.2 SSD through an SFF-8612 interface. It provides a high maximum data throughput of up to 32 Gbit/s and uses a standard PCIe host interface for straightforward integration into compatible motherboards. The internal design makes it suitable for compact and rack-mounted systems where an additional M.2 connection is required.

Suitable for

• Adding an M.2 NVMe SSD to a desktop or server via PCIe
• Systems requiring an internal SFF-8612 interface
• Upgrading storage bandwidth for applications that benefit from high sequential transfer rates

Key specifications

• Brand: DELOCK
• Model / MPN: 64040
• Host interface: PCIe (PCIe 3.0)
• Output interface: M.2 / SFF-8612
• Maximum data rate: 32 Gbit/s
• Internal card: Yes
• Compatible OS: Windows 10, 8.1, 7
• EAN: 4043619640409

How to use

Install the DeLOCK 64040 into an available PCIe slot on the motherboard, secure the card in the chassis, and connect an M.2 NVMe SSD to the SFF-8612/M.2 output using an appropriate cable if required. Ensure the system BIOS/UEFI recognizes the PCIe device and that the operating system has necessary drivers or native NVMe support enabled. After physical installation, configure storage settings in the OS or BIOS as needed.

Recommendations

Use the DeLOCK 64040 in systems with available PCIe slots and adequate cooling; consult the SSD and motherboard documentation for compatibility with SFF-8612 connections and NVMe boot support before installation.