Câble réseau DeLOCK 65177

The DeLOCK 65177 networking cable is a grey Y-adapter cable that splits a single installed Ethernet line into two RJ-45 female ports. It allows two simultaneous 10/100 Mbps Ethernet connections over one fixed cable run when used together with a second adapter on the opposite end. The cable is designed for reliable data transmission in home and office network setups.

Advantages

This Y-adapter provides a space- and cable-saving solution to obtain two network ports from one existing outlet without active electronics. The passive design maintains simple wiring and compatibility with standard 10/100 Ethernet equipment. Its grey jacket and standard RJ-45 terminations match common networking hardware and patch panels.

Suitable for

• Temporarily splitting a wall or patch panel Ethernet outlet into two 10/100 connections
• Home networks where two devices need wired access but only one cable run is available
• Office racks or patch panels where passive port duplication is required

Key specifications

• Brand: DELOCK
• Model / MPN: 65177
• EAN: 4043619651771
• Connector configuration: 1 x RJ-45 to 2 x RJ-45 (Y-adapter)
• Supported speed: 10/100 Mbps (passive splitter, no gigabit support)
• Colour: Grey

How to use

Install one DeLOCK 65177 adapter at each end of the cable run: connect the single RJ-45 plug into the wall socket or patch panel and the two RJ-45 female ports to the two device cables or patch leads. Ensure the opposite end of the same cable is fitted with the second adapter so each device has a dedicated 10/100 link. This adapter is passive and does not require power or configuration.

Recommendations

Use this adapter only for 10/100 Ethernet connections. Do not expect gigabit performance; for Gigabit Ethernet, use individual Cat5e/Cat6 runs or an active switch. For permanent installations, verify wiring and label ports to avoid confusion between duplicated lines.