Câble patch InLine SF/UTP Cat.5e blanc 1 m

The InLine SF/UTP Cat.5e 1m patch cable is a 1 metre network cable with RJ-45 connectors on both ends. Constructed to Cat.5e standard and featuring SF/UTP shielding, it supports Gigabit Ethernet (1 Gb/s) up to a maximum frequency of 125 MHz. The white cable is designed for connecting switches, routers, sockets, patch panels and network cards where reduced interference and reliable data transmission are required.

Advantages

SF/UTP shielding combines foil and braided shielding to reduce electromagnetic interference and crosstalk, improving signal quality in environments with potential noise. Cat.5e specification enables Gigabit connections while maintaining compatibility with standard RJ-45 ports. The 1 m length and white jacket make the cable convenient for short patching runs and tidy installations.

Suitable for

• Connecting switches and routers to patch panels
• Patching network sockets to wall outlets
• Short connections between network cards and local switches
• Structured cabling in offices, server rooms and home networks

Key specifications

• Standard: Cat.5e
• Shielding: SF/UTP (overall foil + individual braid)
• Connectors: RJ-45 to RJ-45
• Data rate: up to 1 Gb/s
• Maximum frequency: 125 MHz
• Length: 1 m
• Colour: White

How to use

Insert each RJ-45 connector into the corresponding network port until it clicks. Use the cable for patching between devices such as switches, routers, patch panels and network interfaces. Ensure connectors are fully seated and avoid sharp bends or heavy tension on the cable to maintain performance and shielding integrity.

Recommendations

For best results, route the cable away from strong sources of electromagnetic interference (large motors, fluorescent fixtures or unshielded power cables). Use the 1 m length for short patch runs; for longer distances select a cable with an appropriate length and category.