Câble patch DIGITUS - CAT6a - S/FTP - Snagless - Cu - 2 m - vert

The DIGITUS Network Cable CAT 6A S/FTP RJ-45, 2 m, green is a Category 6A Class EA patch cord engineered for future-oriented network standards and high-end cabling quality. It is manufactured and tested to ISO/IEC 11801 and DIN EN 50173 Category 6A specifications, with performance verified up to 500 MHz to meet channel requirements and provide reliable data transmission. The cable uses copper conductors, features S/FTP shielding for improved interference protection, PoE+ readiness and a transparent yellow connector for easy Category 6A identification.

Advantages

The LSZH (Low Smoke Zero Halogen) sheath provides improved fire behaviour and low smoke emissions while the molded boot with kink protection and strain relief reduces connector stress. A latch protection on the boot prevents the latching lever from breaking. The transparent yellow coloured plug with metal shielding simplifies identification of Category 6A cables. The cable is PoE+ ready and uses copper conductors for consistent signal performance.

Suitable for

• Structured Ethernet networks requiring Cat6A performance
• High-speed data transmission up to 500 MHz
• Environments where low smoke and halogen-free materials are required
• PoE+ powered devices such as IP phones, cameras and access points

Key specifications

• Standard: ISO/IEC 11801, DIN EN 50173 Category 6A (Class EA)
• Frequency range: up to 500 MHz
• Length: 2 m
• Connector type: RJ-45 to RJ-45
• Shielding: S/FTP (overall foil + individually shielded pairs)
• Conductor material: Copper (Cu)
• Sheath: LSZH (Low Smoke Zero Halogen)
• Colour: Green (connector transparent yellow for identification)
• PoE: PoE+ ready
• MPN / EAN: DK-1644-A-020/G / 4016032327134

How to use

Connect one RJ-45 plug to your network device (switch, patch panel or NIC) and the other RJ-45 plug to the corresponding port on your router, patch panel or endpoint. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the cable without excessive bending and avoid sharp edges; the molded boot and kink protection reduce strain but proper routing extends cable lifetime. For PoE+ applications, confirm device compatibility and power limits before use.

Recommendations

Use the cable within typical indoor network installations and avoid exposure to direct sunlight or outdoor conditions. For installations requiring longer runs or permanent in-wall cabling, consider using certified Cat6A bulk cable and compliant installation practices to maintain specified channel performance.