Câble DVI vers VGA DeLOCK 86756 1 m

The DeLOCK DVI to VGA Cable 86756 (1 m) converts analog video signals between a DVI-A interface and a VGA (D-Sub) display. It has a DVI-A female connector on one end and a VGA male connector on the other, a cable diameter of 8 mm, and is supplied as a single unit in a box. The cable is black and intended for transmitting analog video from devices with a DVI-A output to VGA monitors or projectors.

Advantages

This cable provides a direct, passive connection for analog video between DVI-A and VGA interfaces without the need for external power. The 1 m length offers a compact reach suitable for desk and AV setups, and the standard DVI-A and VGA connectors ensure compatibility with a wide range of displays and source devices.

Suitable for

• Connecting a PC or laptop with a DVI-A output to a VGA monitor
• Connecting DVI-equipped devices to a VGA projector
• Short-range AV setups where a passive analog conversion is sufficient

Key specifications

• Brand: DELOCK
• Model / MPN: 86756
• EAN: 4043619867561
• Cable length: 1 m
• Connector 1: DVI-A (female)
• Connector 2: VGA (D-Sub, male)
• Diameter: 8 mm
• Colour: Black

How to use

Connect the DVI-A female end of the cable to the DVI-A output of the source device using an appropriate DVI cable or adapter if required, and plug the VGA (D-Sub) male connector into the VGA input of the monitor or projector. Ensure both devices are powered off when making connections, then power them on and select the correct input on the display. This passive cable carries analog video only; no audio or digital DVI signals are supported.

Recommendations

Use this DeLOCK DVI to VGA cable for short-distance analog video connections between DVI-A outputs and VGA displays. Avoid using it where a digital DVI-D signal or HDCP-protected content is required; for longer runs or digital conversion, use an active adapter or converter.