Câble d'alimentation Microconnect PE030610 noir 1 m embase C13 embase C20

The MicroConnect PE030610 power cable is a 1 m extension lead with a C13 coupler on one end and a C20 coupler on the other. It is rated for up to 250 V and 10 A and uses H05VV-F cable construction for flexibility and durability. The cable is black and intended for connecting equipment with a C20 inlet to power distribution units (PDUs), UPS systems or compatible power sources.

Advantages

This power cable provides a simple and reliable way to adapt between C13 and C20/C19 power interfaces without altering existing power distribution. H05VV-F construction offers good flexibility for routing in equipment racks and cabinets, while the 1 m length balances reach and cable management. The cable’s 10 A/250 V rating matches common IT and rack-mounted equipment requirements.

Suitable for

• Connecting devices with a C20 inlet to a PDU or UPS
• Adapting C13 plugs to C20/C19 outlets in data centres and server rooms
• Temporary or permanent connections in rack enclosures

Key specifications

• Connector 1: C13 coupler
• Connector 2: C20 coupler
• Cable length: 1 m
• Rated voltage: 250 V
• Rated current: 10 A
• Cable type: H05VV-F
• Colour: Black
• Weight: 0.08 kg

How to use

Plug the C13 coupler into the device or extension lead requiring a C13 connection, then insert the C20 coupler into the PDU, UPS or other compatible C20/C19 outlet. Ensure connections are fully seated and that the total connected load does not exceed the cable’s 10 A rating. Route the cable to avoid sharp bends and pinch points.

Recommendations

Check equipment power requirements and PDU/UPS ratings before use. Do not exceed the 10 A/250 V rating. Inspect the cable regularly for damage and replace it if the insulation, connectors or conductors show wear.