Câble d'alimentation EFB Elektronik EK501.2V2 2 m CEE7/7 C13

The EFB Elektronik EK501.2V2 2m power cable connects devices with an IEC C13 inlet to mains sockets that accept the CEE7/7 plug. Rated for 250 V and 10 A, this cable provides a standard mains connection length of two meters suitable for typical home and office installations. The design focuses on reliable conductivity and safe operation for a range of electronic equipment that uses the C13 coupler.

Advantages

The cable offers a practical two-meter length that balances reach and tidy cable management. Its CEE7/7 mains plug is compatible with many European sockets while the IEC C13 coupler is widely used on computer power supplies, monitors, printers and other IT and AV equipment. With a 250 V, 10 A rating the cable meets common voltage and current requirements for consumer and light professional devices. The construction provides consistent contact and a stable connection during everyday use.

Suitable for

• Desktop computers and workstations
• Monitors, printers and scanners
• Uninterruptible power supplies (UPS) and power strips with C13 inlets
• AV equipment such as amplifiers and receivers with IEC C13 sockets

Key specifications

• Cable length: 2 meters
• Plug type (mains): CEE7/7
• Connector type (device): IEC C13
• Rated voltage: 250 V
• Rated current: 10 A
• Typical application: mains power connection for IT and AV devices

How to use

Insert the CEE7/7 plug into a compatible mains socket and connect the IEC C13 coupler to the device's C13 inlet. Ensure both the socket and device are switched off before connecting or disconnecting the cable. Route the cable to avoid sharp bends and reduce strain on the connectors; secure with cable ties or organizers where necessary. Regularly inspect the cable for visible damage and replace it if insulation or connectors show wear.

Recommendations

Use the cable indoors in dry, well-ventilated environments and avoid exposure to liquids or excessive heat. Do not exceed the specified current rating; for high-current devices or permanent wiring applications select a cable with an appropriate higher rating and professional installation if required.