Câble d'alimentation ACT Powercord C19 - C20 vert 1,8 m

The ACT Powercord C19 - C20 is a high-quality 1.8 m power cable designed to deliver reliable power to active equipment. It has an IEC C19 coupler on one end and an IEC C20 coupler on the other, supports an input voltage of 230 V and is intended for use with equipment that requires a C19/C20 connection, such as rack-mounted servers, PDUs and network hardware.

Advantages

This power cord is constructed to industry standards for secure electrical connections between devices and power distribution units. The 1.8 m length provides flexibility for typical rack and server room layouts. Available in multiple colors from the ACT range, the cable facilitates easy identification and cable management in data centers and equipment closets.

Suitable for

• Rack-mounted servers
• Power distribution units (PDUs)
• Network switches and routers
• Data center and server room equipment

Key specifications

• Brand: ACT
• Model / MPN: AK5098
• Type: IEC 60320 C19 to C20 power cord
• Length: 1.8 m
• Rated input voltage: 230 V
• EAN: 8716065299472

How to use

Connect the IEC C20 male end to the equipment inlet and the IEC C19 female end to the power distribution unit or power source designed to accept a C19 connector. Ensure both ends are fully seated and that the cable is routed without sharp bends or kinks. Confirm that the connected devices and PDU are powered off when making the connection, then power on according to your facility procedures.

Recommendations

Use this ACT C19–C20 cord in environments that match the cable's rated voltage and connector type. For safe operation, avoid overloading circuits, secure the cable to prevent strain on connectors, and replace the cable if any damage to insulation or connectors is visible.