Composant de système de refroidissement Alphacool 11609

The Alphacool Strong Guy is a professional metal deburrer designed for HardTubes and brass tubes used in computer cooling systems. It removes sharp edges from tube cuts to prevent damage to O-rings and sealing surfaces, reducing the risk of leaks when installing tubes into fittings.

Advantages

Made entirely of metal with an ergonomic shape, the Strong Guy fits securely in the hand and provides two deburring sides for both the outer and inner edges of HardTubes and brass tubes. A few turns of the tube on the sharp blades produce clean, smooth edges that allow the tube to slide into O-rings without cutting or abrading them. Its compact size and robust construction make it suitable for repeated workshop use.

Suitable for

• Deburring HardTubes (rigid acrylic or PETG tubing) used in PC water cooling loops
• Preparing brass tubes for leak-free fittings
• Workshops and DIY assembly of custom cooling loops

Key specifications

• Material: metal construction
• Colour: black
• Dimensions (approx.): 57 mm width × 52 mm depth
• Weight: 0.204 kg
• MPN: 11609
• EAN: 4250197116091

How to use

Hold the Strong Guy in one hand and insert the cut end of the HardTube or brass tube into the appropriate deburring side. Rotate the tube a few turns against the blade to remove sharp outer or inner edges. Inspect the tube end visually and by touch to ensure a smooth finish. After deburring, insert the tube into the fitting; the cleaned edge should slide past O-rings without causing cuts or deformation.

Recommendations

Use steady, controlled rotations and avoid excessive force to prevent removing too much material. Clean the deburred tube end of dust or shavings before assembly. Store the tool dry to avoid corrosion and check blades periodically for wear.