Câble SATA mâle/mâle DeLOCK 0,1 m jaune

The DeLOCK SATA Cable Male/Male 0.1 m in yellow is a short internal cable for connecting SATA devices such as hard drives, controller cards or flash storage inside a computer. It conforms to the SATA 6 Gb/s standard and is backwards compatible with earlier SATA versions; achievable transfer speed depends on the connected device and interface generation.

Advantages

This SATA cable supports data transfer rates up to 6 Gb/s and provides stable internal connections between SATA devices. The metal clips on the SATA connectors add retention to prevent accidental disconnection. Its compact 0.1 m length is suitable for tight mounting situations and the yellow jacket makes the cable easy to identify inside a chassis.

Suitable for

• Connecting internal SATA hard drives (HDD)
• Connecting SATA controller cards
• Connecting internal SATA flash storage devices
• Cable routing in small form-factor or tightly spaced systems

Key specifications

• Brand: DELOCK
• Model / MPN: 82798
• EAN: 4043619827985
• Connector: SATA male / SATA male
• Standard: SATA 6 Gb/s (backwards compatible)
• Maximum data transfer rate: up to 6 Gb/s
• Cable length: 0.1 m
• Colour: Yellow

How to use

Connect one SATA male connector to the SATA port of the motherboard, controller card or host device and the other SATA male connector to the SATA device (e.g., HDD or SSD). When connecting to a hard drive, the cable is oriented so the connector points downward. Ensure both connectors are fully seated until the metal clips engage to secure the connection. The cable is intended for internal use inside the computer chassis.

Recommendations

Use this 0.1 m SATA cable for short internal connections where minimal slack is required. Avoid bending the cable sharply near the connectors and keep it away from moving parts and heat sources inside the case. For full 6 Gb/s transfer speeds, verify that both the host interface and the connected device support SATA 6 Gb/s.