Résine 3D WUP 2A transparente 1 kg (FL5159)

Standard photopolymer resin for high-detail 3D printing, offering a transparent finish and low odor for general prototyping and clear parts.

Advantages

Cures at 405 nm UV wavelength, compatible with LCD, DLP, and SLA printers. Low shrinkage (< 3.5%) and Shore D hardness of 80D provide dimensional stability and durable results.

Suitable for

• General prototyping
• Models and clear parts
• Detailed prints requiring transparency

Key specifications

• Resin type: Standard photopolymer resin
• Color: Transparent
• Net weight: 1 kg
• Curing wavelength: 405 nm UV
• Density: 1.1 g/cm³
• Viscosity: 200 mPa·s
• Hardness: 80D Shore D
• Tensile strength: 40 MPa
• Elongation at break: 10%
• Flexural strength: 55 MPa
• Heat deflection temperature: 60 °C
• Shrinkage: < 3.5%
• Odor: Low odor
• Storage temperature: 15-35 °C
• Post-curing: UV post-curing recommended

Recommendations

For best results, post-cure under UV light after printing to achieve optimal mechanical properties.