17,78 €
Prix HT :15,19 €
Marque: DUALSKY
Stock : 4
This MS6360 spare shaft for the XM6360CA/EA motor has a length of 86mm, a diameter of 9mm, and a weight of 35g.MS6360 shaft for the XM6360CA/EA motor...
8,78 €
Prix HT :7,51 €
Marque: LC RACING
Stock : 4
This 5-inch Rear Aero Wing is a spare part used in the BHC-1.Brand: LC Racing..
8,57 €
Prix HT :7,33 €
Marque: MODSTER
Stock : 6
This set contains six washers measuring 6.9x3.5x1.1 for the MODSTER XC-Maximum model.Washer for MODSTER XC-Maximum.SpecificationsDimensions: 6.9 × 3.5..
8,47 €
Prix HT :7,24 €
Marque: ROBITRONIC
Stock : 20
This transparent assortment case made of environmentally friendly PP plastic provides a handy storage solution for spare parts and accessories.Measuri..
8,40 €
Prix HT :7,18 €
Marque: LC RACING
Stock : 4
This aluminum rear shock tower set is a spare part used in the EMB-1, EMB-SC, EMB-MT, EMB-TG, LC12B1, and EMB-RA RC models.Brand: LC Racing..
8,36 €
Prix HT :7,15 €
Marque: MODSTER
Stock : 3
This motor mount B is a suitable spare part for the MODSTER XC-Maximum.Motor mount B for MODSTER XC-Maximum.Brand: Modster..
8,15 €
Prix HT :6,96 €
Marque: LC RACING
Stock : 1
These 9-degree C-hubs (left and right) are spare parts designed for use in the LC10B5 and PTG-1 RC models.C-Hub 9° L+R spare part for LC10B5 and PTG-1..
8,15 €
Prix HT :6,96 €
Marque: ABSIMA
Stock : 2
7,39 €
Prix HT :6,31 €
Marque: ZENOAH
Stock : 20
This piston pin with a length of 25.9 mm and a diameter of 8 mm is a spare part suited for the Zenoah G230RC and G240RC motor.Piston pin suitable for ..
7,98 €
Prix HT :6,82 €
Marque: LC RACING
Stock : 4
This upper deck is a spare part designed for the LC Racing PTG-1 model.Upper deck spare part for PTG-1.Brand: LC Racing..
7,94 €
Prix HT :6,78 €
Marque: CEN-RACING
Stock : 20
This steering block serves as a replacement for GS246 and can be used on the left, right, front, or rear of the vehicle.Steering block for left/right,..
7,77 €
Prix HT :6,64 €
Marque: MODSTER
Stock : 2
This complete linkage rod set with clevises is suitable for the MODSTER ASW 28 V1/V2 with a 2600 mm wingspan and consists of six rods in total: two fo..
7,66 €
Prix HT :6,55 €
Marque: PR RACING
Stock : 1
This set includes eight spare o-rings with a size of 15x1.2mm, suitable for the PR SB401-R.Set of eight O-rings measuring 15 × 1.2 mm, suitable for th..
7,58 €
Prix HT :6,48 €
Marque: LC RACING
Stock : 1
This rear hinge pin set is a spare part used in the LC Racing BHC-1.Rear hinge pin set for BHC-1.Brand: LC Racing..
7,30 €
Prix HT :6,24 €
Marque: LC RACING
Stock : 2
These red shock O-rings are spare parts used in the LC10B5 and PTG-1 models.Red shock O-ring spare part for LC10B5 and PTG-1.In the box10× red shock O..
7,30 €
Prix HT :6,24 €
Marque: ROBITRONIC
Stock : 17
These long, medium-hardness white rear springs for the Protos feature a specification of 16 windings, a length of 91mm, and a diameter of 1.5mm.Long w..
7,30 €
Prix HT :6,24 €
Marque: ROBITRONIC
Stock : 20
This handy sorting and storage box made of environmentally friendly transparent PP plastic features 18 compartments measuring 33x37mm to bring order t..
7,17 €
Prix HT :6,13 €
Marque: LC RACING
Stock : 2
185 mm wheelbase upper deck, spare part for EMB-1 and EMB-MT.Brand: LC Racing..
7,09 €
Prix HT :6,06 €
Marque: LC RACING
Stock : 2
Upper deck with a 225 mm wheelbase.Spare part for LC Racing EMB-SC, EMB-DT, EMB-TG and EMB-RA models.Brand: LC Racing..
7,09 €
Prix HT :6,06 €
Marque: LC RACING
Stock : 4
This wheelbase chassis side guard set (185mm) is an official spare part for the EMB-1 and EMB-MT.Chassis side guard set with 185 mm wheelbase. Spare p..
7,09 €
Prix HT :6,06 €
Marque: LC RACING
Stock : 2
These drive cups are official spare parts designed for use in the LC Racing EMB-1, EMB-SC, EMB-MT, EMB-DT, EMB-TG, LC12B1, and EMB-RA models.Drive cup..
7,09 €
Prix HT :6,06 €
Marque: LC RACING
Stock : 4
4WD front buggy wheels for 1/10 scale.Spare part for LC10B5 and PTG-1.In the box2× 4WD front buggy wheelsBrand: LC Racing..
6,97 €
Prix HT :5,96 €
Marque: LC RACING
Stock : 5
This aluminum draglink is a spare part designed for use in LC Racing EMB-1, EMB-SC, EMB-MT, EMB-DT, EMB-TG, LC12B1, and EMB-RA models.Aluminium dragli..
6,97 €
Prix HT :5,96 €
Marque: LC RACING
Stock : 5
This front bumper is an official spare part specifically designed for use in the LC Racing PTG-1 RC model.Front bumper spare part for PTG-1.Brand: LC ..
6,75 €
Prix HT :5,77 €
Marque: LC RACING
Stock : 1
These differential gaskets are spare parts suitable for use in the LC Racing models LC10B5, PTG-1, PTG-2, and PTG-2R.In the box4× Diff gasketBrand: LC..
6,75 €
Prix HT :5,77 €
Marque: LC RACING
Stock : 6
This spare part set includes shock caps, spring cups, and rod ends, suitable for use in the EMB-1, EMB-SC, EMB-MT, EMB-DT, EMB-TG, LC12B1, and EMB-RA...
6,75 €
Prix HT :5,77 €
Marque: MODSTER
Stock : 12
This main gear with 43 teeth is a spare part for the MODSTER XC-Maximum.Main gear with 43 teeth for MODSTER XC-Maximum.Brand: Modster..
6,53 €
Prix HT :5,58 €
Marque: MODSTER
Stock : 14
This tail LED is a spare part for the MODSTER BO 105.Brand: Modster..
6,53 €
Prix HT :5,58 €
Marque: PR RACING
Stock : 5
This set includes six 3.5mm e-clips suitable for the PR SB401-R.In the box6× 3.5 mm e-clipsBrand: PR Racing..
6,24 €
Prix HT :5,33 €
Marque: LC RACING
Stock : 7
This steering link is a spare part designed specifically for use in the BHC-1.Brand: LC Racing..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 4
This M3x42 steel turnbuckle is a spare part designed for use in the LC10B5 and PTG-1 RC models.Steel turnbuckle M3x42, spare part for LC10B5 and PTG-1..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 2
This rear ballstud mount is a spare part specifically designed for use in the LC Racing BHC-1 model.Rear ballstud mount spare part for BHC-1.Brand: LC..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 2
This 40mm turnbuckle is a spare part suitable for the LC Racing EMB-1, EMB-SC, EMB-MT, EMB-DT, EMB-TG, and LC12B1 models. The set contains 2 pieces.40..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 1
These short steel bushings are spare parts used in LC10B5 and PTG-1 RC models, supplied in a package of 4 pieces.Short steel bushing spare part for LC..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 2
These aluminum washers are spare parts designed for use in the LC Racing PTG-2 and PTG-2R models.In the box4× Aluminium washers 3 × 6 × 12× Aluminium ..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 2
This aluminum ball end set with a diameter of 4.3mm includes two pieces and is a spare part suitable for the EMB-1, EMB-SC, EMB-MT, EMB-DT, EMB-TG, LC..
6,09 €
Prix HT :5,20 €
Marque: LC RACING
Stock : 4
Aluminum spacer measuring 3 x 6 x 2 mm, designed as a spare part for the PTG-1 RC model.In the box3 x Aluminum spacer 3 x 6 x 2Brand: LC Racing..
5,86 €
Prix HT :5,01 €
Marque: ROBITRONIC
Stock : 20
This air filter tube for 1/8 scale allows the air filter to be positioned differently and has a connection inner diameter of 16 mm.SpecificationsConne..
5,60 €
Prix HT :4,78 €
Marque: ROBITRONIC
Stock : 20
This handy sorting and storage box made of environmentally friendly transparent PP plastic features up to 10 variable compartments with freely usable ..
5,60 €
Prix HT :4,79 €
Marque: AZURE
Stock : 4
These high-durability and extremely lightweight 5" dual-blade propellers in purple feature an optimized shape and airfoils with a 5" pitch and a 5mm h..
5,60 €
Prix HT :4,78 €
Marque: PR RACING
Stock : 2
This set includes five M3 thread screws with a 6mm length, suitable for the PR SB401-R.SpecificationsThread: M3Length: 6 mmIn the box5× set screwsBran..
5,40 €
Prix HT :4,61 €
Marque: MODSTER
Stock : 5
This main gear is a suitable replacement part for the MODSTER BO 105.Main gear for MODSTER BO 105.Brand: Modster..
5,35 €
Prix HT :4,57 €
Marque: LC RACING
Stock : 3
Spare part hex screws (M2x4) with shims (2x 4x0.5) in a four-piece pack, used for the LC10B5 and PTG-1 models from LC Racing.In the box4× Hex screw M2..
5,07 €
Prix HT :4,33 €
Marque: AZURE
Stock : 20
Designed for quiet and stable flight, these 6.1" tri-blade propellers with a 4.5" pitch are optimized for efficient, long-range camera flights with lo..
5,07 €
Prix HT :4,33 €
Marque: HOBBYWING
Stock : 3
The Xerun XD10 Pro is a Brushless, Sensored ESC for 1/10 Drift. An aluminium fan provides cooling, while flexible 13AWG silicone cables have low resis..
130,13 €
Prix HT :111,22 €
Marque: MJX
Stock : 1
Body shell for MJX RC models, supplied without accessories.Key featuresBody shell without accessoriesSpecificationsBrand: MJX..
75,50 €
Prix HT :64,53 €
Marque: KILLERBODY
Stock : 15
KILLERBODY Furious Angel body in white, 195 mm, ready to use (RTU).Key featuresWhite colour195 mmReady to use (RTU)SpecificationsBrand: KillerbodyColo..
61,09 €
Prix HT :52,22 €
Marque: ROCKAMP
Stock : 11
This assembly stand for 1/10 cars allows you to work at eye level, featuring easy pivoting and a quickly adjustable height of 32 / 60mm. The stand inc..
13,18 €
Prix HT :11,27 €
Marque: KILLERBODY
Stock : 1
KILLERBODY Lexan Type-A unpainted motor dummy (KB48191)Manufacturer: KILLERBODYModel: KB48191..
14,02 €
Prix HT :11,98 €
Marque: KILLERBODY
Stock : 7
KILLERBODY Lexan Type-D dummy engine, unpainted (KB48194)Manufacturer: KILLERBODYModel: KB48194..
14,02 €
Prix HT :11,98 €