Câble d'alimentation Schuko IEC320 C19 16A 2,0 m ROLINE

The ROLINE Power Cord Schuko IEC320 C19 16A 2.0m is a 2.0 metre power cable designed for stable power delivery to devices such as UPS units from around 3000 VA and blade servers. The cable has a CEE7/7 (Schuko) plug on one end and an IEC320 C19 angled female coupler on the other, and is specified for 250 VAC and 16 A. The cable is black and uses H05VV-F 3G1.5 construction with conductors of 1.5 mm².

Advantages

This power cord provides a reliable 16 A connection with an IEC320 C19 female connector suitable for high-power IT equipment. Its 2.0 m length offers convenient reach for typical rack and UPS installations, while the angled C19 coupler can improve clearance in tight spaces. The H05VV-F 3G1.5 cable construction meets common safety and flexibility requirements for indoor power connections.

Suitable for (tasks / use cases)

• Connecting UPS units (commonly used for UPS from 3000 VA)
• Powering blade servers and other rack-mounted IT equipment
• Use in server rooms, data centres and network racks
• Replacing or extending existing CEE7/7 to C19 power connections

Key specifications

• Cable length: 2.0 m
• Connector 1: CEE7/7 (Schuko)
• Connector 2: IEC320 C19 angled female (C19 coupler)
• Current rating: 16 A
• Voltage: 250 VAC
• Cable type: H05VV-F 3G1.5 (3 x 1.5 mm²)
• Colour: Black
• Brand / MPN / EAN: ROLINE / 19.08.1552 / 7611990197187

How to use

Insert the CEE7/7 plug into a suitably rated mains outlet and connect the IEC320 C19 female coupler to the device's C19 inlet. Ensure that the outlet and connected equipment are rated for 250 VAC and 16 A. Route the cable to avoid sharp bends and mechanical strain, and secure it so it does not obstruct airflow in racks. Do not use the cable outdoors or in wet locations unless the environment and connectors are appropriately protected.

Recommendations

Check compatibility of the C19 inlet on your UPS or server before use, confirm the device's current draw does not exceed 16 A, and inspect the cable periodically for damage. Replace the cable if insulation or connectors are worn or damaged.