Câble d'alimentation IEC320/C19 - C20 16A 2,0 m ROLINE

The ROLINE Power Cord IEC320/C19 - C20 16A 2.0 m is a black mains extension cable designed for reliable power delivery to equipment such as UPS units from 3000 VA and Blade servers. It has a C20 male connector on one end and a C19 female connector on the other, supports 250 VAC and 16 A, and uses H05VV-F 3G1.5 conductors for safe operation.

Advantages

The cable provides a standardized IEC320 C19–C20 connection for server racks and UPS systems, ensuring compatibility with high-current devices. Its 2.0 m length offers flexibility in equipment placement while the H05VV-F 3G1.5 construction meets common safety and durability requirements. The black colour integrates unobtrusively into data-centre and server-room environments.

Suitable for

• Connecting UPS units rated around 3000 VA and above
• Powering Blade servers and rack-mounted equipment with C19/C20 inlets
• Server rooms, data centres and IT infrastructure installations

Key specifications

• Cable length: 2 m
• Connector 1: C20 coupler (male)
• Connector 2: C19 coupler (female)
• Cable type: H05VV-F 3G1.5 (3 x 1.5 mm²)
• Rated voltage/current: 250 VAC / 16 A
• Colour: Black

How to use

Connect the C20 male end to the power output of a UPS or power distribution unit and plug the C19 female end into the device inlet on the server or other equipment. Ensure both ends are fully seated and that the connected equipment is powered off during installation. Route the cable to avoid sharp edges and reduce strain on the connectors.

Recommendations

Verify that the connected device’s inlet and the power source support 16 A and 250 VAC. Do not exceed the rated current; inspect the cable periodically for damage and replace if the insulation or connectors are compromised.