Câble de brassage monomode MPO/APC-4xLC BlueOptics HE87808GPH-KB003M 3 mètres

The BlueOptics HE87808GPH-KB003M MPO/APC-4xLC Singlemode Patch Cable in blue is a 3-meter optical fibre cable designed for high-density network environments. It connects an MPO/APC multi-fiber interface to four LC singlemode connectors, supporting singlemode transmission for long-reach, low-loss data links. The cable is intended for structured cabling in data centres, telecommunication rooms and equipment racks where consistent optical performance and space-efficient connectivity are required.

Advantages

This singlemode patch cable provides low insertion loss and stable optical performance across typical singlemode wavelengths, ensuring reliable signal integrity for high-speed links. The MPO/APC to 4xLC breakout design allows compact trunking with easy fan-out to multiple LC ports, reducing installation complexity in high-density panels. The cable jacket and connector assemblies are manufactured to provide mechanical robustness and repeated mating cycles, supporting long-term operation in demanding network environments.

Suitable for

Key specifications

How to use

Route the 3 m cable between the MPO trunk port and the target patch panel or adapter panel, ensuring the MPO/APC connector aligns with the MPO port keying to maintain correct polarity. Fan out the four LC connectors to the intended LC adapters or transceivers, taking care to avoid tight bends and excessive stress on the breakout point. Verify optical continuity and insertion loss with appropriate test equipment after installation to confirm correct connections and acceptable loss levels.

Recommendations

Store and handle the cable to avoid sharp bends and pressure on connector endfaces. Clean connector endfaces before mating and use dust caps when connectors are not in use. Follow standard singlemode fibre handling procedures and test after installation to ensure low insertion loss and correct polarity.