Bande lumineuse LED Lamptron Flexlight Multi Simple RGBW 3M — Dual/2x30 LED

Lamptron Flexlight Multi Simple RGBW 3M — Dual/2x30 LEDs is a 3-metre flexible LED strip that combines RGB color mixing with a dedicated white channel to provide both colored and true white illumination. The Dual configuration contains two parallel rows of 30 LEDs each, allowing even light distribution along the length of the strip. The product is intended for accent, ambient and task lighting in PC interiors, desks, shelves, cabinets and other indoor spaces where adjustable color and white light are required.

Advantages

The dual-row design delivers smoother and more uniform light across the 3 m length, reducing visible gaps between LEDs. RGBW support enables saturated colors and a separate white tone for neutral or warm illumination. The flexible strip format allows installation on curved or flat surfaces and placement in narrow spaces. Low-profile design and even spacing of LEDs make the strip suitable for discreet integration in furniture, case interiors or architectural accents.

Suitable for

• Interior PC case accent and component illumination
• Desk, monitor or workspace backlighting
• Shelf, cabinet and display lighting
• Custom ambient lighting in living spaces and behind TV units

Key specifications

• Length: 3 metres of continuous flexible LED strip
• LED configuration: Dual — two parallel rows of LEDs
• LED count: 2 x 30 LEDs (total 60 LEDs)
• Color support: RGB plus dedicated white channel (RGBW)
• Mounting: adhesive-backed flexible strip for surface mounting
• Typical use environment: indoor, dry locations

How to use

Prepare the mounting surface by cleaning it of dust, oils and residues to ensure good adhesion. Measure and route the strip along the desired installation path, bending gently where needed to follow curves. Remove the backing from the adhesive and press the strip firmly into place on a flat, dry surface. Connect the strip to a compatible RGBW controller or motherboard header that supports the required voltage and pinout; follow the controller manufacturer’s wiring instructions. Configure colors and white intensity via the controller or software interface to achieve the desired balance between colored effects and usable white light.

Recommendations

For consistent long-term operation, use a compatible controller and a power supply rated for the strip’s voltage and total current draw. Avoid prolonged exposure to moisture or direct sunlight. If cutting the strip is necessary, cut only at the designated cut marks and re-seal connections to prevent air exposure and ensure reliable electrical contacts.