Câble coaxial e+p AB 201 G 1,5 m

The e+p AB 201 G 1.5 m coaxial cable is a double-shielded 75 Ω connection cable with gold-plated contacts and ferrites at both ends. Designed for reliable TV, radio and digital signal transmission, it meets DIN 45 325 and provides screening greater than 95 dB for reduced interference in wide-band cable installations.

Advantages

Double-shielded construction and gold-plated contacts reduce signal loss and ensure stable connections. Ferrite cores on both ends further suppress electromagnetic interference. The cable is digital-capable and conforms to standard 75 Ω DIN 45 325 specifications for compatibility with common TV and radio equipment.

Suitable for

• Connecting TV receivers and set-top boxes
• Radio antenna connections
• Home theater and AV equipment
• Wide-band cable installations requiring high screening

Key specifications

• Length: 1.5 m
• Impedance: 75 Ω
• Screening: >95 dB
• Connectors: coax plug to coax jack
• Contacts: gold-plated
• Standard: DIN 45 325
• Cable type: double shielded, ferrites at both ends

How to use

Connect the coax plug to the signal source (for example a set-top box or antenna outlet) and the coax jack to the receiving device (TV or radio). Ensure connectors are fully seated to maintain a secure electrical connection. Route the cable away from power lines and large sources of electromagnetic noise where possible to preserve signal quality.

Recommendations

For best results in wide-band or digital installations, use the cable without unnecessary bends and avoid running it parallel to mains power cables; replace if connector plating is visibly worn or if screening appears degraded.