Pastilles adhésives Tesa BK20 41×41×8 mm, lot de 2

Tesa BK20 adhesive pads 41×41×8 mm, pack of 2 provide a straightforward solution for mounting and fixing light objects on a variety of surfaces. These small, low-profile pads combine a cushioned body with an adhesive backing to create a neat attachment that can be semi-permanent or removable depending on the substrate and application. The pads are designed for indoor environments such as homes, offices and craft areas where a discreet, tool-free fix is required.

Advantages

The adhesive pads offer a compact design and a soft cushion layer that helps absorb minor shocks and compensate for uneven surfaces. Their adhesive backing provides reliable initial tack on common materials including painted walls, wood, glass and metal. Because the pads are pre-cut and ready to apply, installation is quick and does not require drilling or additional hardware. Their low height keeps mounted items close to the surface for a tidy appearance.

Suitable for

• Mounting lightweight decorative items such as small frames, plastic ornaments and hooks
• Securing cable clips, small sensors or remote controls on flat surfaces
• Temporary or semi-permanent fixes in offices, craft rooms and living areas

Key specifications

• Pad dimensions: 41 × 41 × 8 mm
• Pack quantity: 2 adhesive pads
• Design: low-profile cushioned pad with adhesive backing
• Application environment: indoor use on flat, clean surfaces
• Attachment type: pressure-sensitive adhesive suitable for various substrates

How to use

Ensure the mounting surface is clean, dry and free of dust, grease or loose paint. Peel the protective liner from the adhesive side, position the pad accurately and press firmly for several seconds to achieve good contact. For best results, hold pressure or apply a small weight for a short time after mounting. When mounting two-sided items, align both parts before final pressing to ensure correct placement.

Recommendations

Do not apply to delicate wallpaper, unpainted or powder-coated surfaces, or surfaces that may be damaged by adhesive removal. Test adhesion on an inconspicuous area if unsure. Avoid use on surfaces exposed to significant heat, moisture or heavy loads. For long-term safety, follow the weight and substrate guidance and use mechanical fasteners where higher loads are expected.