Compte Contact
Votre panier
DPD et FedEx – date de livraison indiquée sur la page produit
Besoin d’aide ? Demandez à notre IA

Filament Elegoo PLA-CF 1,75 mm noir 1 kg

Filament Elegoo PLA-CF 1,75 mm noir 1 kg
Filament Elegoo PLA-CF 1,75 mm noir 1 kg
20,41 €
PDF
PDF
Disponibilité 294 Référence 876885 Modèle 50.203.0464 Garantie 2 ans

Livraison et retours

Livraison estimée mardi 1 décembre
Vous serez tenu informé grâce à notre système de suivi détaillé
Options de paiement
Carte bancaireVisaMastercardPayPalApple PayGoogle PayVirement bancaire

Description

ELEGOO PLA-CF (polylactic acid reinforced with carbon fiber) is a 1.75 mm composite filament supplied on a 1 kg spool. It combines the easy printability of PLA with increased stiffness and reduced shrinkage thanks to carbon fiber reinforcement, producing durable, dimensionally accurate parts with a natural matte finish. The filament is suitable for most FDM/FFF 3D printers with a 1.75 mm feed and is intended for functional prototypes, housings and technical components that require higher rigidity while remaining lightweight.

Advantages

The carbon-fiber-doped PLA reduces warping and deformation, improving dimensional precision and part fit. Prints show a matte surface with subtle layer lines for a professional look without extensive post-processing. The filament is vacuum-sealed with a desiccant to limit moisture absorption and has a diameter tolerance of ±0.02 mm for reliable feeding and fewer jams. It prints well alone or blended with standard PLA where compatible.

Suitable for

  • Functional prototypes and mechanical parts
  • Durable housings and enclosures
  • Lightweight structural components
  • Technical models requiring dimensional accuracy

Key specifications

  • Brand: ELEGOO
  • Model (MPN): 50.203.0464
  • EAN: 6932704908495
  • Material: PLA with carbon fiber
  • Diameter: 1.75 mm (tolerance ±0.02 mm)
  • Spool weight: 1 kg
  • Color: Black
  • Density: 1.24 g/cm³
  • Melting point: 165°C
  • Nozzle temperature: 210–240°C
  • Print bed temperature: 35–65°C (depending on printer and surface)
  • Recommended drying: 55 ± 5°C
  • Maximum recommended printing speed: <300 mm/s

How to use

Store the vacuum-packed spool with the included desiccant until ready to print. If the filament has absorbed moisture, dry it at about 55 ± 5°C before printing. Load the 1.75 mm filament into an FDM/FFF printer and set the nozzle temperature between 210 and 240°C and the bed temperature between 35 and 65°C depending on your printer and build surface. Use a textured PEI or another compatible surface for good adhesion. Print speeds below 300 mm/s are recommended; adjust retraction and cooling to suit your model and printer.

Recommendations

To minimize nozzle wear from carbon fibers, use a hardened or steel nozzle and avoid excessive retraction. Keep filament dry and use recommended temperatures and a suitable build surface for best dimensional accuracy and surface finish.

How to use

Store the vacuum-packed spool with the included desiccant until ready to print. If the filament has absorbed moisture, dry it at about 55 ± 5°C before printing. Load the 1.75 mm filament into an FDM/FFF printer and set the nozzle temperature between 210 and 240°C and the bed temperature between 35 and 65°C depending on your printer and build surface. Use a textured PEI or another compatible surface for good adhesion. Print speeds below 300 mm/s are recommended; adjust retraction and cooling to suit your model and printer.

Recommendations

To minimize nozzle wear from carbon fibers, use a hardened or steel nozzle and avoid excessive retraction. Keep filament dry and use recommended temperatures and a suitable build surface for best dimensional accuracy and surface finish.

Caractéristiques

Caractéristiques
Couleur du produit
Noir
Couleurs d’impression
Noir
Diamètre
1.75 mm
Matériau
PLA with carbon fibre
Poids net
1 kg
Type de produit
Filament 3D
Points clés
  • Functional prototypes and mechanical parts
  • Durable housings and enclosures
  • Lightweight structural components
  • Technical models requiring dimensional accuracy
  • Brand: ELEGOO
  • Model (MPN): 50.203.0464
  • EAN: 6932704908495
  • Material: PLA with carbon fiber
  • Diameter: 1.75 mm (tolerance ±0.02 mm)
  • Spool weight: 1 kg
  • Color: Black
  • Density: 1.24 g/cm³
  • Melting point: 165°C
  • Nozzle temperature: 210–240°C
  • Print bed temperature: 35–65°C (depending on printer and surface)
  • Recommended drying: 55 ± 5°C
  • Maximum recommended printing speed:
Historique des prix des 6 derniers mois
Filament Elegoo PLA-CF 1,75 mm noir 1 kg
Actuel
20,41 €
Le plus bas 7 j
20,17 €
Le plus haut 7 j
20,41 €
Variation 24 h
+0,24 €   +1%
Variation 7 j
+0,24 €   +1%
Variation 30 j
0,00 €   0%

Écrire un avis

Note *
Remarque : le code HTML n’est pas interprété.

Plus de produits ELEGOO dans cette catégorie

12

Produits populaires dans cette catégorie

3
Marque: ELEGOO Stock : 80
ELEGOO PLA Matte est un filament noir pour imprimante 3D qui donne aux impressions une finition mate avec un faible brillant et une surface lisse. L'e..
22,79 €
Prix HT :19,48 €
Marque: ELEGOO Stock : 420
17,05 €
Prix HT :14,57 €
1 fournisseur
Acheter
Vendeur / Verkäufer : UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lituanie / Litauen · N° d’entreprise / Firmennummer 303192950 · N° TVA / USt-IdNr. LT100008198612 · Expédition depuis l’UE (Lituanie) / Versand aus der EU (Litauen)
WhatsApp
Messenger
Bonjour, je suis l’assistant IA de DistriNode. Je peux vous aider à trouver des produits, comparer des options, créer des devis PDF ou ouvrir des demandes d’assistance.
Toutes les catégories