Câble de raccordement Ethernet Dexlan 858730 CAT6a S/FTP 1 m, rouge

Dexlan 858730 is a 1 m Ethernet patch cable in red, built to the CAT6a standard with S/FTP shielding. It is intended for 10 Gigabit Ethernet networks and high-speed data transmission between network devices. The cable is terminated with standard RJ45 connectors and has a durable outer jacket to withstand regular installation and routing in home and office environments.

Advantages

The S/FTP shielding provides both an overall foil shield and individually shielded twisted pairs to reduce electromagnetic interference and crosstalk, improving signal integrity at higher frequencies. CAT6a specification supports 10 Gigabit Ethernet over short runs, and the 1 m length minimizes excess cable bulk in rack or desktop setups. A molded connector design and robust jacket increase mechanical reliability during repeated connection and cable management.

Suitable for

Key specifications

How to use

Insert one RJ45 connector into the network port of a switch, router, server or workstation and the other into the corresponding port of the connected device. Ensure connectors are fully seated until the latch clicks. Route the 1 m patch cable to avoid sharp bends and excessive tension; use cable management clips or horizontal managers where available. For best performance, keep the cable away from high-power electrical lines and sources of strong electromagnetic interference.

Recommendations

Use this short CAT6a S/FTP patch cable for clean, short links within racks, between adjacent devices or from patch panels to equipment. For permanent runs through walls or conduit, choose a cable rated for in-wall or external use. Regularly inspect connectors and the jacket for damage and replace the cable if shielding or conductors are compromised.