Câble Ethernet ProXtend CAT6 RJ-45 1,5 m orange

The ProXtend CAT6 F/UTP CCA Ethernet Cable is a 1.5 m orange network cable with RJ-45 connectors on both ends. Constructed with copper-clad aluminum (CCA) strands and AWG 26 conductors, the cable offers a cost-effective solution for 10/100/1000Base-T(X) networks. A foil shield (F/UTP) reduces electromagnetic interference, while gold-plated contacts and reinforced strain relief with latch protection ensure reliable connections and easier installation.

Advantages

This Ethernet cable combines CCA conductors with CAT6 specifications to provide gigabit-capable data transfer up to 1000 Mbit/s at a lower cost compared with pure copper alternatives. The foil shielding improves resistance to EMI in environments with moderate interference. Gold-plated RJ-45 contacts enhance contact reliability and corrosion resistance. Reinforced strain relief and latch protection increase connector durability during frequent plugging and routing.

Suitable for

• Home and small office wired networks
• Connecting PCs, switches, routers and NAS devices
• Temporary or color-coded cable installations where 1.5 m length is sufficient

Key specifications

• Length: 1.5 m
• Connectors: RJ-45 — both ends
• Cabling: CAT6, F/UTP (foil shielded)
• Conductor: Copper-clad aluminum (CCA), AWG 26
• Data rate: up to 1000 Mbit/s (Gigabit Ethernet)
• Color: Orange
• Contacts: Gold-plated

How to use

Plug each RJ-45 connector into the network ports of your devices (for example PC, switch or router). Ensure connectors click into place and avoid sharp bends or tension on the cable; use the reinforced strain relief to prevent damage near the connector. For best performance, keep cable runs within recommended lengths for Ethernet and avoid running the cable parallel and close to strong electrical sources.

Recommendations

Use this ProXtend CAT6 F/UTP CCA cable for standard gigabit Ethernet connections in home and small office setups. Choose pure copper cables for long runs or environments requiring maximum electrical performance; use shielded routing and grounding practices in areas with strong EMI.