Cadre photo individuel Walther Design KP050G

The Walther Design KP050G is a single picture frame made of half-rounded plastic profile with a gold metallic finish. The profile is 18 mm wide and designed for a bevelled mount. The frame accepts clear glass and includes a light grey perforated inlay and a hardboard backing; sizes up to 20x30 cm (8x11 3/4 inch) have a put-up hinge, while larger formats feature hangers with clips and from 30x40 cm (11 3/4 x 15 3/4 inch) two additional jumbo hangers. The sealing system uses turn clips. Packaging is shrink-wrapped foil with protection corners for sizes from 20x30 cm.

Advantages

The half-rounded plastic profile provides a lightweight and durable frame option with a consistent finish in gold metallic. The 18 mm width suits standard photo mounts and bevelled mounts, while the supplied clear glass, perforated inlay and hardboard back create a ready-to-hang solution. Multiple hanging options (hangers with clips and jumbo hangers on larger formats) make installation flexible. Protective shrink-wrapping and corner protection reduce transport damage.

Suitable for

• Displaying single photographs or prints up to the specified frame sizes
• Home or office walls where a gold metallic accent is desired
• Bevelled mount displays that require an 18 mm profile
• Retail or gifting where ready-packaged frames are required

Key specifications

• Brand: Walther Design
• Model / MPN: KP050G
• Profile: half rounded plastic, 18 mm width
• Finish: gold metallic
• Glass: clear
• Inlay: light grey, perforated
• Back: hardboard (put-up hinge to 20x30 cm)
• Hanging: hangers with clips; from 30x40 cm two jumbo hangers
• Sealing: turn clips
• Packaging: shrink-wrapped foil with protection corners (from 20x30 cm)
• Category: Photo Frames and Albums
• Dimensions (example size provided by manufacturer): 17 mm width (profile), depth 428 mm, height 528 mm (product listing dimensions)
• EAN: 4004122186631

How to use

Place your photograph or print behind the clear glass, position the light grey perforated inlay if required for a bevelled mount, and secure the hardboard backing using the turn clips. Use the supplied hangers with clips to mount the frame on a wall; for frames from 30x40 cm use the two jumbo hangers for additional support. Handle the glass and corners carefully during installation and remove protective foil only after fixing the frame in place.

Recommendations

For best results, choose a mount compatible with the 18 mm profile and avoid excessive moisture near the frame. When transporting or storing, keep the original shrink-wrapping and corner protection until final installation to reduce risk of scratches or dents.