Brosse métallique KWB 604630 10 cm

The KWB 604630 wire wheel is a 10 cm diameter stripping brush with a 6 mm shank designed for fine sanding, cleaning and removing paint, varnish and welding discolouration. Constructed with nylon and aluminium oxide abrasive materials, the brush is suitable for use on stainless steel, wood, metal, light alloys and non-ferrous metals, and can be used for surface finishing of flat workpieces when mounted on power tools.

Advantages

The brush combines flexible nylon filaments with aluminium oxide abrasives to provide effective material removal while maintaining a degree of surface conformity. Its 10 cm diameter and 6 mm shank make it compatible with common rotary tools and bench grinders. The construction is intended for consistent performance on a variety of substrates including stainless steel and soft metals without aggressive gouging.

Suitable for

Key specifications

How to use

Mount the wire wheel on a compatible rotary tool or grinder with a 6 mm shank receptacle and secure according to the tool manufacturer’s instructions. Start at low speed to check compatibility with the workpiece, then increase speed as appropriate for the material and task. Apply light, even pressure and move the brush across flat surfaces to remove coatings or to finish the substrate. Avoid excessive force to prevent damage to the brush or workpiece.

Recommendations

Use appropriate personal protective equipment (safety glasses, gloves and a dust mask). Test on a small area first to confirm the finish and avoid overheating delicate surfaces. Replace the brush if filaments become excessively worn or deformed.