Système de refroidissement pour ordinateur GRAUGEAR G-M2HS03-F

The GRAUGEAR G-M2HS03-F is a compact cooling solution engineered for solid-state drives. Measuring 87 mm wide, 27 mm deep and 34 mm high, the unit combines a low-profile form factor with a black and silver finish to integrate into a wide range of system builds. It is designed to improve thermal dissipation from NVMe and M.2 SSDs, helping maintain consistent performance and prolong component life under sustained loads.

Advantages

The cooling system offers targeted heat transfer through its low-profile housing and thermally conductive materials, reducing operating temperatures of installed drives. Its compact footprint allows installation in constrained spaces while the neutral black and silver aesthetic matches common motherboard and chassis color schemes. The product is intended to lower thermal throttling risk and support more stable data throughput during intensive read/write operations.

Suitable for

• Cooling NVMe and M.2 solid-state drives in desktop PCs and compact systems
• Systems where space is limited but effective thermal management is required
• Workstations and gaming rigs that run sustained high I/O workloads

Key specifications

• External dimensions: 87 mm (width) × 27 mm (depth) × 34 mm (height)
• Color: black and silver
• Low-profile design suitable for tight installation spaces
• Designed for effective heat dissipation from SSD components

How to use

Install the cooling system directly over the SSD following the motherboard and chassis manufacturer’s instructions for M.2 device placement. Ensure the drive and mounting surface are clean and free of obstructions before fitting the cooler. Secure the unit using the appropriate mounting hardware or screws provided with your system, and verify that the cooler does not interfere with adjacent components or cooling airflow paths. After installation, monitor SSD temperatures during initial operation to confirm improved thermal behavior.

Recommendations

Place the cooler where it does not block case airflow or other components, and combine it with adequate case ventilation for best results. Periodically inspect the mounting to ensure a stable connection and keep contact surfaces free of dust or thermal-compound residue to maintain thermal performance.