Bloc d'alimentation Axis 02040-001

AXIS Camera Heater Power Supply (Power supply Axis 02040-001) is a wired 75 W power unit designed for use with Axis security cameras. It provides a 24 V output and comes with a 7 m power cable, connector and power cord connector. When used with the AXIS Q6010-E network camera, this power supply enables the camera heater to extend the camera's operating temperature down to −50°C (−58°F).

Advantages

The power supply delivers a stable 24 V, 75 W output and includes necessary accessories—7 m AXIS power cable and a 2-pin connector—so it is ready for installation. It is compatible with Axis cameras and specifically supports the AXIS Q6010-E heater function to maintain reliable operation in very low temperatures.

Suitable for

Key specifications

How to use

Connect the power supply to mains using the included power cord connector. Use the supplied AXIS 24 V, 7 m cable and 2-pin connector to connect the unit to the AXIS Q6010-E camera according to the camera installation guide. Verify proper connections and power up the supply; the camera heater will operate and extend the camera's rated low-temperature capability to approximately −50°C (−58°F).

Recommendations

Install the power supply in a dry, ventilated location near the camera. Follow Axis installation instructions and local electrical codes. Use only the supplied cable and connectors or Axis-approved replacements. For long-term reliability in extreme cold, verify connections periodically and ensure the enclosure and cable routing protect against moisture and mechanical strain.